← All Card Games

How to Play TriPeaks Solitaire

TriPeaks Solitaire, also called Three Peaks or Tri Towers, is a quick one-player patience game. Deal 28 overlapping cards into three small mountain peaks, turn the lowest row face up and use a waste pile to remove uncovered cards one rank above or below its top card. This guide uses King–Ace wrapping, so a run may continue from queen to king to ace to two. Clear all three peaks to win.

1 player52 cardsSolitaire

TriPeaks Solitaire quick rules

In brief: TriPeaks Solitaire, also called Three Peaks or Tri Towers, is a quick one-player patience game. Deal 28 overlapping cards into three small mountain peaks, turn the lowest row face up and use a waste pile to remove uncovered cards one rank above or below its top card. This guide uses King–Ace wrapping, so a run may continue from queen to king to ace to two. Clear all three peaks to win.

  1. Shuffle a 52-card deck without jokers.
  2. Build three overlapping peaks in four rows: 3 cards at their tops, then 6, then 9, and a shared bottom row of 10, for a total of 28 cards.
  3. Deal the upper 18 peak cards face down and the bottom 10 cards face up.
  4. Place the remaining 24 cards as stock; turn the first stock card face up to start the waste, leaving 23 stock cards.
  5. An uncovered face-up peak card can be placed onto waste if its rank is one higher or one lower than the waste top, regardless of suit.
  6. In this version ace connects to both two and king; King–Ace wrapping is allowed.
  7. Each removed card becomes the new top waste card and can start another one-rank step.
  8. Face-down peak cards turn face up once every overlapping card below them has been removed.
  9. If no exposed card can be played, turn the next stock card onto waste to start a new potential chain.
  10. Win as soon as all 28 peak cards are removed. If the stock is empty and you cannot make another move, the deal is lost.

Rules version: Three-peak one-pass game with King–Ace wrapping enabled. Other versions are described separately.

Dealing the three overlapping peaks

TriPeaks uses one ordinary 52-card deck without jokers. Arrange 28 cards in three connected, overlapping peaks. The uppermost row contains three cards, one per mountain. The next row contains six; the third contains nine; and the common bottom row contains ten cards spanning the peaks.

The top three rows—3 + 6 + 9 = 18 cards—begin face down. The bottom ten cards begin face up and all are initially playable. Each upper card is covered by cards in the next row, so removing lower cards gradually exposes previously concealed ones.

Keep the other 24 cards as a stock. Turn one face up immediately to begin a waste pile, leaving 23 face-down stock cards. The waste is the reference rank for legal plays from the peaks. There are no separate suit foundations, no tableau moves between columns and no hand to hold.

The one-rank-higher-or-lower rule

On each move, take one uncovered, face-up peak card whose rank is exactly one above or below the top waste card. Place that peak card face up on waste. Its rank now becomes the comparison for your next removal. Suits and colors do not matter.

For example, if the waste shows 8♣, you can remove an exposed 7♥ or 9♦ from the peaks. A six, ten or eight is not a legal move, even if it shares a suit with the waste. Once 9♦ becomes the new top waste, you can move an exposed eight or ten next.

Legal chain in this guideQueen to king to ace is allowed by wrapping.

You must move a peak card, not a card buried beneath it. A covered queen does not become legal simply because a king is on waste. It must be freed by removing all cards overlapping it first.

Can you move from king to ace?

Yes, in the version used here. Treat ranks as a circle: A–2–3–4–5–6–7–8–9–10–J–Q–K–A. That means the ranks next to an ace are two and king; the ranks next to a king are queen and ace.

For example, a waste card showing Q♠ permits an exposed K♥. Once the king has been played, an exposed A♦ can be played. After the ace, an exposed 2♣ is legal, creating a chain of Q–K–A–2.

Not all TriPeaks computer games use this rule. Some have no wrap, where a king can lead only to a queen and an ace only to a two. Other apps enable wrapping on their easy difficulty and disable it on harder modes. The opening version must be specified before interpreting whether a move is legal.

Our main worked examples and quick rules consistently use the wrapping version.

When a face-down peak card turns over

Every face-down peak card overlaps with one or more cards in the next row. It becomes available only after all cards directly covering it have been removed. At that point turn the card face up. Then it can be removed if it is adjacent in rank to the current waste top.

Suppose a face-down nine in the third row is covered by two cards in the bottom row. If you remove only the first bottom card, the nine stays face down. When the second covering card is taken away, flip the nine over. If waste shows eight or ten, the newly exposed nine is immediately playable.

It is possible to free several face-down cards during a single chain of successful removals. This is why a move that initially appears to remove just one low card may unlock a useful series of higher cards.

In a physical setup, keep the cards overlapped consistently. Confusing which lower cards cover an upper card can lead to premature reveals and invalid moves.

Drawing from the twenty-four-card stock

The opening waste card came from the original 24-card stock, leaving 23 unseen cards. Whenever no exposed peak card fits the current waste rank—or when you strategically decide to stop a chain—you may turn the next stock card face up onto waste. Its value becomes the new starting rank.

Each draw consumes one stock card. A discarded waste card under the top card is not separately playable and does not return to your hand. The standard one-pass version here does not reshuffle or recycle the waste into the stock.

If the waste shows 5♥ and none of the currently exposed peak cards is a four or six, draw a stock card. Suppose it is J♣. You can now remove an exposed ten or queen, potentially opening a new sequence. Stock draws are a limited resource, so they should be used intentionally.

There is no option to choose among the top three stock cards; they are revealed sequentially, one at a time.

Worked chain: clear cards across two peaks

Imagine the waste begins on 8♣. Exposed peak cards include 9♥, 10♠, J♦ and Q♣. You remove 9♥ onto the eight, then 10♠ onto the nine, then J♦ onto the ten, then Q♣ onto the jack. That is a chain of four peak removals without drawing a new stock card.

If the queen’s removal uncovers a previously hidden king, the sequence may continue to the king. With our wrapping rule, an uncovered ace could then follow that king. A single productive chain can therefore clear much of the exposed layout.

Four-card removal chainFollow the current waste card, not the original starter
Starting waste8♣Reference rank
Peak moves9♥ → 10♠Each one rank higher
Next removalsJ♦ → Q♣All ranks adjacent
Result4 clearedNo stock card spent

The suits alternate unpredictably, but that is irrelevant. A card’s rank and whether the overlapping cards have been cleared determine legality.

How to win—and when a TriPeaks deal ends

The win condition is simple: remove all twenty-eight cards from the three peaks. You do not have to use every stock card, clear the waste pile or form four suit foundations. As soon as all peaks are gone, the deal is complete.

The deal is lost if there are still peak cards and the stock has been exhausted with no legal rank-adjacent removal available. Because hidden cards and stock order vary, not every randomly dealt board is necessarily winnable. Good play can improve your chances but cannot guarantee a solution from every position.

Computer TriPeaks games may show a numerical score, a countdown or multiple levels. Those systems are optional scoring layers; they do not replace the core objective of clearing the peaks.

Streaks and optional scoring

Many TriPeaks apps award larger bonuses for removing multiple peak cards consecutively without using stock. A chain is sometimes called a streak. For instance, a game might give one point for the first removal, two for the next, three for the next and so on, then reset when a stock card is drawn.

That scoring scale is not universal. The original computer versions and newer browser games use different bonuses for exposed cards, cleared peaks, time or stock remaining. To compare two scores meaningfully, both people need to play the same software and scoring mode.

For an ordinary tabletop game, you can ignore points and count a win simply when all twenty-eight cards have been removed. If keeping a score, choose a published scoring schedule before dealing rather than inventing point values halfway through a run.

TriPeaks strategy for longer chains

Look for both directions. If waste is eight, a seven and a nine are equally legal, but one might connect to several more exposed cards while the other stops immediately.

Favor moves that uncover hidden cards. Removing a blocker may reveal a rank that continues the chain or frees another card. A move that exposes two hidden cards can be more valuable than one that simply removes a convenient bottom-row card.

Watch king–ace possibilities. In this chosen rule set, a king on waste can lead to queen or ace. Plan a chain that uses wrapping instead of assuming ranks end at king.

Keep the stock for dead ends. With only 23 further stock draws after the starter, using stock when a productive peak chain is already available can waste opportunities.

Recheck everything after a reveal. Every exposed new card changes the available options; do not continue following a planned chain without looking at the freshly uncovered ranks.

TriPeaks versions and related solitaire games

No-wrap TriPeaks

A stricter version does not treat king and ace as neighbors. Kings are adjacent only to queens; aces only to twos. Many digital games offer this as a difficulty option.

All cards face up

Some easy versions show all twenty-eight cards from the start, removing the hidden-information element while keeping overlapping-card availability.

Different streak bonuses

Digital implementations may award points for each extra consecutive play, penalize stock draws or give bonuses for clearing individual peaks. These do not affect the core legal rank step.

Golf and Pyramid Solitaire

Pyramid pairs cards totaling thirteen, not rank-adjacent removals. Golf Solitaire uses a simpler seven-column layout with a related up-or-down waste rule.

TriPeaks Solitaire frequently asked questions

How many cards are used?

One standard 52-card deck without jokers.

How many are in the peaks?

Twenty-eight: rows of three, six, nine and ten.

How many cards begin face up?

The ten in the bottom row.

What can you move?

An uncovered face-up peak card one rank above or below the top waste card.

Do suits matter?

No. Rank adjacency is enough.

Can an ace be played on a king?

Yes in this wrapping version; not in some other modes.

How many stock cards remain after the starter?

Twenty-three.

What wins the game?

Removing all twenty-eight peak cards.

Rules references

Solitaire variants often differ in stock passes, wrapping, group movements or scoring. The main game above uses one specified convention, with original examples.

Similar Posts